EXPANDED POLYSTYRENE ADHESIVE
With the use of expanded polystyrene in construction
gaining ever wider use the need has developed for
ancillary products such as adhesives to facilitate
the application of EPS building products.
Polyglue is a synthetic rubber based adhesive used
to bond expanded polystyrene to itself and to all
other clean and dry surfaces such as metal, brick,
wood and fibreglass.
Polyglue functions as a contact adhesive, has excellent
bond strength, good heat resistance and high initial
1) Stir well before use
2) Surface to be bonded should be clean , free of
dust and dry
3) Apply a thin coat of Polyglue to both surfaces
to be bonded with a brush.
4) Allow to dry for about 10-15minutes.
5) Bring surfaces together and apply mild pressure.
6) Brushes and tools can be cleaned using Genkem’s
Nova11 cleaner or toluene solvent.
Adhesive type: Pre-vulcanised synthetic rubber based.
Drying time: Touch dry in approximately 15 minutes
Specific gravity: 0,78
Softening point: 800 C
Coverage: Approximately 3m 2/lt
Shelf life: About 6months in original unopened containers
Packing: 1 and 5 lt metal tins
Storage: Keep in a cool, dry place out of the reach
Sales codes: PG001 = 1lt, PG005 = 5lt